You have been redirected to the website
is no more, but don’t worry, our products have been moved here to our sister site . You’ll still get the same great range and prices, they’ll just be here at directplastics.com instead.
- Above Ground Drainage
- Guttering
- Hargreaves Cast Iron Gutter
- Ogee Cast Iron Gutter
Ogee Cast Iron Gutter
Hargreaves Ogee Cast Iron Guttering is available in both Primed and Painted Finishes (Black only). Choose your size below.
How do I join my Ogee Cast Iron Gutter ?
Jointing Methods for Premier Gutters
The most popular way of jointing cast iron gutters is by
using a low modulus silicone sealant or specialist
rubberised bitumen gutter mastic.
The sealant should be spread evenly within the gutter
socket applying additional sealant around the jointing hole
before placing the gutter spigot into the socket and
compressing both parts using M6 x 25mm corrosion
resistant mushroom head bolts, ensuring the bolt head is
on the inside of the gutter.
The washer and nut should be lightly tightened from the
underside of the gutter to allow excess sealant to be
removed. Do not over tighten as this could result in gutter
damage.
Note: If gutters have been cut, remove any loose filings
immediately to ensure no discolouration/ rust marks on
the paint surface. Also check that cut ends, bolts, nuts and
any slight installation damage is made good with the
appropriate primer and paint.